DNS_PROBE_FINISHED_NXDOMAIN In Google Chrome, mistake is a rare occurrence. This is usually caused by a bad Internet connection or incorrect DNS settings. This error simply states, “This site cannot be reached,” and includes the error code “DNS_PROBE_FINISHED_NXDOMAIN.”

This issue can be inconvenient if you’re working on a critical project or browsing a website. However, there are answers to all difficulties, even this one. DNS_PROBE_FINISHED_NXDOMAIN is a DNS_PROBE_FINISHED_NXDOMAIN variable.

DNS_PROBE_FINISHED_NXDOMAIN, also known as DNS_PROBE_FINISHED_NXDOMAIN, is a user-friendly error in Google Chrome that frequently happens in conjunction with the best solutions. DNS settings may become corrupted, or there may be problems with the Internet Network.


Unfortunately, DNS errors such as DNS_PROBE_FINISHED_NXDOMAIN might occur if DNS fails to look for the IP address. Chrome is a web browser developed by Google. DNS_PROBE_FINISHED_NXDOMAIN is the error message in Chrome, and the address could not be discovered.

Read Also:

  1. DPC Watchdog Violation
  2. Xbox One Won’t Turn On
  3. Geforce Experience Error Code 0x0003

Firefox is a web browser developed by Mozilla. In Mozilla Firefox, it displays Hmm. We can’t seem to find that website. We are unable to connect to’s server.

Microsoft Edge is a browser developed by Microsoft. The blunder Microsoft Edge displays a message that says I can’t seem to find this page. Make sure you’re using the correct address.

Safari’s error message reads, “Safari Can’t Find the Server.” Safari is unable to open the page “” because the server “” is unavailable.


DNS_PROBE_FINISHED_NXDOMAIN is a quick remedy that may be accomplished by following the methods and steps outlined below. Choose your steps based on the nature of your issue.

1. Release And Renew Your IP Address

If you can open webpages on other computers but not on your own, it’s a client-side DNS problem rather than a server-side DNS error. As a result, it is preferable to release and renew IP addresses. It will then refresh your new IP address after flushing the local DNS cache.

For use with Windows

Step 1: To enter the Run prompt, hit Windows key + R.

Step 2: In the search box, type cmd to open the command prompt.

Step 3: In the command prompt, type the following commands, pressing enter after each one.

/release ipconfig

/flushdns ipconfig

/renew ipconfig

set dns netsh int ip

reset winsock netsh

Step 4: After you’ve successfully performed all of the tasks, restart your computer.

For the MAC

Step 1: Go to System Preferences in the first step.

Step 2: If you notice a network icon, click it. At the bottom of the screen, you’ll see an advanced button, which you should click.

Step 3: Select the TCP/IP tab, and then select the “Renew DHCP” button.

Step 4: To clear the local DNS cache, launch the MAC terminal from the Utilities menu.

Step 5: Once the terminal is open, type the following command:

dscacheutil -flushcache dscacheutil -flushcache dscacheutil

Step 6: Your DNS PROBE FINISHED NXDOMAIN error will be resolved after you restart your computer.

2. Restarting The DNS Client Service 

Windows users can attempt restarting the DNS client service to fix the DNS PROBE FINISHED NXDOMAIN error. Restarting the DNS client service will assist you in resolving and caching DNS domain names.

Because of a DNS caching mistake, the domain you’re trying to utilise has moved to a new hosting provider, and you’re seeing the DNS_PROBE_FINISHED_NXDOMAIN error in Google Chrome.

Step 1: Press Windows key + R to open the Command prompt.

Step 2: In the search box, type “services.msc” and hit OK.

Step 3: A window for services will appear. Look for a DNS client, then right-click on it and choose Restart from the menu. You must utilise the command prompt if the restart option is not available or is greyed out.

Step 4: Press Windows + R to open the Command Prompt.

Step 5: In the search box, type “cmd” and press OK.

Step 6: In the command prompt, type the following commands and press enter after each one:

dnscache dnscache dnscache dnsc
start dnscache with net

Because you’re attempting different versions of Windows, you can get an error.

“The requested pause, continue, or stop for this service is invalid.”

The commands will only work if CMD is run as a network service.

3. Change DNS Servers 

It is your ISP’s responsibility to set your DNS servers to default. You can try substituting your DNS servers with your network’s default DNS servers to change or update them.

For use with Windows

Step 1: Press Windows key + R to open the Command prompt.

Step 2: In the search box, type “Control Panel” and press OK.

Step 3: Select Network and Internet from the drop-down menu. Then go to the Network and Sharing Center and click on it.

Step 4: Change adapter settings is located on the left side of the window; click it.

Step 5: Right-click on your current network and select it. The Properties option will appear in the dropdown; select it.

Step 6: Determine whether you want to use Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) based on the DNS settings.

Step 7: Next, select Properties.

Optional 8th step Click on “Use the following DNS server addresses.” Click OK after entering the IP address below. and for IPv4

2606:4700:4700:1111 and 2606:4700:4700:1001 for IPv6

For the MAC

Step 1: Navigate to System Preferences by clicking the Apple icon in the top-left corner of your Macbook or iMac.

Step 2: If you notice a network icon, click it. At the bottom of the screen, you’ll see an advanced button, which you should click.

Step 3: Select the DNS tab, then enter the Cloudflare DNS server addresses and click OK. and for IPv4

2606:4700:4700:1111 and 2606:4700:4700:1001 for IPv6

Step 4: Now it’s time to restart your Mac. Open the webpage, and everything should be OK.

4. Reset Chrome Flags 

Because the error is sometimes caused by faulty settings, restoring your browser settings to default will resolve your issue. By resetting Chrome Flag settings, you can resolve the error that this site can’t be reached.

Step 1: To begin, launch your Google Chrome browser.

Step 2: In the address bar above, type chrome:/flags.

Step 3: Next to the search field, click Reset all to default.

Step 4: Restart your computer. The DNS_PROBE_FINISHED_NXDOMAIN (site cannot be reached) problem has now been resolved.

 5. Temporarily Disable VPN and Antivirus

VPNs and antivirus software can occasionally prevent certain networks or programmes from operating. DNS servers may also be included. Temporarily disabling VPNs and antivirus applications will solve your problem. You can visit the website without any problems if you open it.

 6. Check Your Windows Local Hosts File

Step 1: To begin, go to the Start Menu and select it.

Step 2: Look for any text editors you have installed on your computer. It may be Notepad++, Atom, or sublime, for example.

Step 3: Select “Run as administrator” from the context menu when you right-click on the text editor.

Step 4: In the text editor, go to File, then Open, and navigate to the location below.


Step 5: Go to the hosts file and open it.

Step 6: Check to see if your website is mentioned when you open it. Remove your website if it appears on the list.

For the MAC

Step 1: Select Utilities from the Go menu in the top-left corner of your Macbook or iMac.

Step 2: Now is the time to open the terminal.

Step 3: In the terminal, type the commands below and press Enter.

/private/etc/hosts sudo nano

Finally, if your website is on the list, remove it.

 7. Verify Your Domain’s DNS

It’s not necessary that the issue is solely on the client’s end. It’s possible that the issue is on the domain’s end. If the problem persists after reviewing your host’s file, you should examine the DNS settings for the domain name. It could also happen if you have a DNS caching problem when transferring your domain from one domain host to another.

8. Restart Your Computer 

If none of the other ways work, give this one a try as a last resort. Restart both your computer and your router. Restarting your computer will undoubtedly resolve all of your issues and, if necessary, delete any temporary cache.

Read Also:

  1. Clock Watchdog Timeout
  3. Can’t Connect To This Network


As a result, those were some of the most effective methods and steps for Windows and Mac users to resolve the DNS_PROBE_FINISHED_NXDOMAIN (site cannot be reached) error. If you properly follow the procedures and stages, your problem will be resolved in no time.

Simply select the appropriate method for resolving your issue, and you will be able to use your website without error once more. I hope this information was helpful in solving your problems. Until next time, stay tuned!