In Windows 7, Windows 8.1, and Windows 10, the DPC Watchdog Violation issue is a prevalent problem. The abbreviation DPC stands for Deferred Procedure Call. The term “watchdog” refers to a bug checker that monitors or records the performance of your Windows programmes and computer.
When a computer fails to receive a response from a hardware component, a driver, or a software programme that is tied to it, the BSOD error occurs. Many users have recently reported the DPC Watchdog Violation issue, which is causing them a great deal of grief.
DPC Watchdog Violation Error: What Causes It?
Many factors can result in the DPC Watchdog Violation BSOD Error. We’ve also included some of the causes and solutions. If you follow these steps, your DPC Watchdog Violation BSOD Error will be resolved, and you will no longer experience blue screen of death!
- Drivers that are out of current or are damaged.
- The operating system is incompatible with newly installed hardware.
- The hardware is not properly installed.
- Version of SSD Firmware that is no longer supported.
- System files that have been corrupted
Malware assaults. - BIOS is not up to date.
Read Also:
Method 1: Check Your Cables to Fix DPC Watchdog Violation Error in Windows 10
This is the most straightforward way to resolve the DPC Watchdog Violation problem. This strategy will protect you from all types of stress and strain. The biggest blunder we make is haphazardly connecting the connections.
You must double-check that your cables are properly connected. If the wires appear to be in good working order, move on to the next options.
Method 2: Examine Your Hard Drive
Checking your disc will determine whether there are any faults in your computer that are generating this error, and if there are, it will also cure the error.
The disc check also examines the hard drives in the system. Simply follow the procedures below to resolve the DPC Watchdog Violation problem.
Step 1: Go to the Start Menu and type Command Prompt (Admin) in the search box.
Step 2: The Command Prompt opens in Administrator mode.
Step 3: In the command prompt, type the following command and click enter.
/f chkdsk C:
Note: Your hard drive partition can be substituted for the letter “C.”
Method 3: Drivers Updated
You will experience issues if you use your computer with outdated drivers. The DPC Watchdog Violation error is one of the faults. To avoid such problems, make sure your drivers are up to date.
Check for BIOS updates on the developer’s website for your motherboard. The DPC Watchdog Violation BSOD Error will be gone once you repair the BIOS upgrades.
Method 4: Install a New iastor.sys Driver
Step 1: To open the run command, press Windows key + R.
Step 2: In the search box, type devmgmt.msc.
Step 3: Select IDE ATA/ATAPI controllers with a double-click.
Step 4: Select a controller that supports SATA AHCI, commonly known as a Standard SATA AHCI Controller. Right-click on the controller, select properties, select the Driver tab, and finally, Driver details to ensure you’ve selected the correct controller. Make that your iastor.sys is displayed as a driver, then click OK.
Step 5: Select Update driver from the Driver tab to update the driver.
Step 6: Select “Browse my computer for driver software” from the drop-down menu.
Step 7: Next, select Let me choose from a list of device drivers on my computer from the drop-down menu.
Step 8: Select the Standard SATA AHCI Controller from the drop-down menu.
Step 9: Click Next, exit the window, and then restart your computer.
Method 5: Update Your Operating System
Keeping your Windows up to date ensures that the programme and your job run smoothly. Microsoft distributes fresh updates to improve the reliability of the system and address various concerns. The DPC Watchdog Violation BSOD Error will be resolved if you install the most recent updates.
To bring up to date:
Step 1: Type Update into the search box.
Step 2: Check for new updates and install them if they are available.
Method 6: Perform a Complete System Scan
It is critical to keep your computer free of virus attacks in order to protect your data. To keep your computer safe from viruses, you should scan it on a regular basis. Antivirus software is available on the market to assist you. Scan your entire system for The DPC Watchdog Violation BSOD Error and remove it.
For users of Windows 10:
Step 1: Go to the Start Menu.
Step 2: Open Defender by typing Defender in the search box.
Step 3: Locate the shield symbol on the left side of the panel and click it.
Step 4: A new window will open with an Advanced Scan option, which you should select.
Step 5: Select the full scan option, which will run a malware scan over the entire system.
Method 7: Examine Issues with Software and Hardware Incompatibilities
Older versions of Windows may not support the newest version, resulting in issues such as The DPC Watchdog Violation BSOD Error. The mistake will be detected and fixed by checking software and hardware compatibility. For users of Windows 10:
Step 1: Go to the Settings menu.
Step 2: Select the Update & Security option.
Step 3: Next, choose Troubleshoot from the drop-down menu.
Step 4: Finally, run the Program Compatibility Troubleshooter.
Method 8: Remove Recently Installed Software
It’s possible that the DPC Watchdog Violation BSOD Error is caused by freshly installed software. You must also uninstall it if you have any recent installations on your machine.
Step 1: Select Start from the Start Menu.
Step 2: Search or enter for the Control Panel.
Step 3: Select Programs among them
Step 4: From the programmes, look for recent installations and select, right-click on it, and choose to uninstall option.
Step 5: Restart your computer and see if your DPC Watchdog Violation BSOD Error is cured.
Method 9: Run System Restore
Running system restore gets you back to the previous system configuration. It is possible that the DPC Watchdog Violation BSOD Error must have occurred when you have installed a new driver. To fix it, you must perform a system restore point, and your error will be fixed.
For Windows 7 and 8.1 users:
Step 1: In the Search, type System Properties and open it.
Step 2: Navigate to System Protection and hit on System Restore.
Step 3: Choose Next, then choose the preferred restore point in the new window.
Step 4: When you are done selecting your preferred restore point, select Next and Finish.
Step 5: The restoration process will start, and your computer will restart.
Check if the DPC Watchdog Violation BSOD Error is solved or not.
For users of Windows 10:
Step 1: First, navigate to Settings.
Step 2: Choose Update & Security
Step 3: Now, select Recovery.
Step 4: Get Started button is present under Reset this PC click on that.
Step 5: Afterwards, select the Keep my files option from the pop-up window.
Step 6: Finally, proceed with the instructions and restart your computer.
Read Also:
Conclusion
Those were different methods to fix The DPC Watchdog Violation error. Hoping this was helpful for you and was able to fix your problem. Follow the steps and methods wisely without any mistakes, and your DPC Watchdog Violation BSOD Error will be solved within no time. See you next time!
