How To Fix ‘Driver Power State Failure’ Error Guide

Driver Power State Failure is a rare blue screen problem that occurs when your computer’s driver goes into sleep mode while you’re working. The BSOD usually arises when the computer wakes up from hibernation because Windows is unable to wake up the device driver or the driver takes too long to respond.

Simple tweaks to the power settings can solve the problem, but other users may need to look farther for help. There are six options for resolving the Driver Power State Failure issue in Windows 10.

The most common reason of Driver Power State Failure, often known as a Blue Screen of Death, is an incompatible driver. To escape the agony of the Blue Screen of Death, install the best software to solve these problems.

Driver Power State Failure

Depending on what triggered the problem, you can either restart the computer or try one of the options listed below. When Windows users see the Blue Screen of Death, they usually panic, but in this case, you may solve the Driver Power State Failure in Windows 10 by following some simple actions.

Putting your operating system into sleep mode causes driver power state failure in 99 percent of cases. When you try to log in to the device, this error message will almost certainly show.

Read Also:

  2. Steam Content Servers Unreachable

The problem is caused by incompatibility issues with certain of the system’s drivers or by the power settings. Driver Power State Failure can cause a variety of issues on your computer, with users experiencing the following:

Stop Code for Driver Power State Failure – When using your computer, this is a common BSoD issue. The power state of the driver has failed. The most recent version of Microsoft’s operating system is Windows 10.

Many HP, Dell, and Lenovo users have reported this problem, which affects practically all devices, including Toshiba, HP, Dell, Acer, Alienware, Samsung, Sony, and Lenovo.

Nvidia Driver Power State Failure – This problem is commonly caused by your Nvidia graphics card. Try out some of our suggestions if you have an Nvidia graphics card. The driver’s power state has failed.

When you utilise a specific USB device, this problem can occur. To address the problem, unplug all USB devices and look for the one that is causing the problem.

Driver Power State Failure on Startup or Boot — Customers have reported that this problem can occur while your computer is booting up. You will be unable to use your computer if this problem occurs at startup.

The power state of the driver has failed. Photoshop, Autocad – This issue can occur in a variety of apps, but it has been reported in Photoshop and Autocad by some users.

Whether it’s a solid-state drive (SSD) or a hard disc drive, the driver’s power status has failed (HDD) A new hard disc or SSD can sometimes cause this problem. If this happens, double-check that your drivers are up to date and that everything is running well.

The power state of the driver has failed. McAfee and Kaspersky are two antivirus software companies. While third-party apps are frequently to blame, your antivirus software could also be to blame.

This problem appears to be more widespread with Kaspersky or McAfee, according to users. A driver-related issue causes the Driver Power State Failure blue screen – 0x0000009f error screen to display on startup. Microsoft has addressed the issue in update file KB 2983336.

The power state of the driver has failed. ntoskrnl.exe – In this error message, ntoskrnl.exe is an application that can be used to display the name of the file that is generating the error. The most prevalent source of this problem, according to users, is ntoskrnl.exe.

Understanding the Driver Power State Failure Error

The Driver Power State Failure error is a “Blue Screen of Death” (BSOD) error that occurs when there is an issue with a device driver’s power state. In essence, it signifies that a driver has failed to respond within the expected timeframe, leading to system instability and a crash.

This error can manifest differently depending on the specific driver or hardware involved but is universally characterized by its disruptive nature.

Causes of the Driver Power State Failure Error

To effectively address the Driver Power State Failure error, it’s crucial to identify its root causes. Several factors can trigger this error, including:

1. Outdated or Incompatible Drivers:

One of the primary culprits behind this error is outdated or incompatible device drivers. When drivers are not in sync with the hardware or the operating system, issues can arise.

2. Power Management Issues:

Windows has various power management features that allow it to control the power state of hardware components. If there are conflicts or errors in these power management settings, it can lead to the error.

3. Corrupted System Files:

System files are essential for the proper functioning of your operating system. Corruption in these files can cause various errors, including Driver Power State Failure.

4. Hardware Problems:

Faulty hardware components, such as malfunctioning RAM modules, a failing hard drive, or a problematic graphics card, can trigger this error.

5. Incompatible or Malicious Software:

Certain software applications, particularly third-party antivirus programs, can interfere with drivers and cause this error. Malware infections can also corrupt drivers or system files.

6. BIOS/UEFI Settings:

Incorrect settings in the BIOS or UEFI firmware can lead to driver-related issues and contribute to this error.

How To Fix a Driver Power State Failure On Windows 10

Here are the answers.

Solution 1: Switch to Safe Mode

While updating a device driver is typically the most effective way to obtain new bug fixes, the newer driver may contain issues that cause this issue. If this is the case, you’ll need to revert to the driver’s prior working version.

You may need to restart Windows in Safe Mode first to successfully roll back your drivers. To get started, right-click Device Manager in the Start menu.

Step 1: From the Device Manager window’s list, locate and pick the driver that you feel is causing the BSOD problem. This is most likely a newly installed or upgraded device. If you’re still unclear, look over your BSOD dump logs for further information. Once you’ve located the device, right-click it and select Properties from the drop-down menu.

Step 2: Select the Driver tab in the Properties window, then the Roll Back Driver option. Windows will ask you to confirm why you’re resetting the device. Select one of the acceptable options, then select Yes to confirm.

Step 3: After uninstalling the troublesome driver, Windows will reinstall the most recent driver. However, turning off your device’s power-saving mode before restarting your PC can help prevent this BSOD issue from recurring.

If it’s available, go to the Power Management tab and uncheck the Allow the computer to turn off this device to save power box.

Step 4: Click OK to save your changes. After you’ve rolled back the device driver, restart your computer by selecting Shut down or sign out > Restart from the Start menu.

Solution 2: Make Your Drivers Updated

The driver’s power status has failed. The most typical reason of BSOD is a problem with the installed device drivers. You may need to manually install updated drivers unless your device is set to install them automatically.

This is usually accomplished through Windows Update, which searches for (and instals) any necessary drivers for your machine.

Step 1: To check for new driver updates using Windows Update, right-click the Start menu and select Settings. Go to Settings > Update & Security > Download or Download and Install if drivers are available. If Windows does not search for drivers right away, select Check for Updates first.

Step 2: While Windows Update provides most device drivers, you may need to manually download and install drivers from the manufacturer’s website. NVIDIA graphics drivers from the NVIDIA website are much newer than those available through Windows Update.

Step 3: In the same way, certain chipset drivers for internal motherboard components (such as built-in WiFi) may require downloading from the manufacturer, especially if you built your own PC.

Solution 3: Perform an SFC Scan 

Step 1: Access the Win + X menu by pressing Windows Key + X, then selecting Command Prompt (Admin) from the list. Use PowerShell instead of Command Prompt if Command Prompt isn’t available (Admin).

Step 2: To execute sfc /scannow, type it into Command Prompt and click Enter. The scanning procedure will begin now. Do not stop the SFC scan because it can take up to 10 minutes.

Users propose utilising DISM scan instead of an SFC scan if you can’t run an SFC scan or if the scan can’t fix the problem. To do so, take the following steps:

As an administrator, open Command Prompt. Execute these commands:

DISM.exe /Online /Cleanup-image /scanhealth DISM.exe /Online /Cleanup-image /scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth DISM.exe /Online /Cleanup-image /Restorehealth

If you haven’t already done so, run the SFC scan after the DISM scan is finished. The problem should be resolved after conducting both scans, and the error message should no longer show. Using the techniques given above, you may be able to resolve the Driver Power State Failure alert.

Solution 4: Change Your Power Settings

Step 1: To launch the control panel, use Windows Key + S. Select Control Panel from the drop-down option. When the Control Panel appears, look for and select Power Options. By clicking on the power button, you can change its function.

Step 2: Select Change settings that are now unreachable from the drop-down menu. Disable Turn off the rapid start, sleep, and hibernation options (recommended). To save your changes, click the Save button.

Step 3: Driver Capacity Your power settings may be the cause of failure on Dell devices. Users believe that removing specific power settings, such as the ones we showed you above, can cure the problem.

Solution 5: Change Your Power Plan Settings 

Step 1: From the Control Panel, go to Power Options. Under the presently selected power plan, you can change plan settings. Then, from the drop-down box, choose Change advanced power settings.

Step 2: Expand the Sleep section and select Never for all of the options. Go to Wireless Adapter and PCI Express Settings. All options should be expanded and set to Never.

Read Also:

  2. Selected Boot Image Did Not Authenticate
  3. Operation Did Not Complete Successfully Because the File Contains a Virus


After that, the issue should be resolved fully. Remember that this feature is supported by a number of devices on your computer, so you’ll have to turn it off for all of them. Your power settings may be causing the Windows Driver Power State Failure issue.

Many electronics can be switched off to save energy, however this option might occasionally result in this issue.