How To Enter Bios Windows 11

When you switch on your computer, the Basic Input/Output System (BIOS) loads Windows for you. It coordinates the flow of data between your OS and peripherals like a mouse and keyboard. Last but not least, you can use it to troubleshoot and adjust various settings. However, booting into BIOS isn’t like opening a standard file system.

You’ve found the proper place if you want to learn more about using BIOS in Windows 11. This article will provide several options for doing so, allowing you to pick the method that is most convenient for you.

Finding Your Way to Windows 11’s BIOS

For many Windows 11 issues, entering the system’s BIOS is the answer. However, BIOS is not a standard file system folder. The configurations can be accessed in a few different ways:

Windows 11: Booting into the BIOS

In Windows 11, the BIOS menu is most often accessed during startup. To access the BIOS, users must hit the designated key. This is the procedure:

• Activate the laptop.
• You should press the designated key as soon as the computer starts booting up in order to access a menu.

Once you press the button, the BIOS screen should load. Make the necessary adjustments by exploring its various menus.

This is the quickest way to do things, but it also takes the most agility. This may be an issue if your computer boots up in a flash, giving you no time to press the necessary key before you need to start using it. Lucky for us, there are alternate routes into BIOS.

Using Windows 11’s Built-in Recovery Environment (BIOS)

If you didn’t press the designated BIOS key in time during startup, or if you don’t know what that key is, you can still access BIOS using Settings. Get it done by following these steps:

1. Press the cog symbol in the lower right of the Start menu to enter the system’s configuration options.
2. Make a selection under “System” on the left side of the screen.
3. To recover, click “Recovery” on the right.
4. Next to “Advanced startup,” click “Restart now.”
5. We’ll restart your device, so save any open documents just in case. Click “Restart now” if you’ve made any progress and want to resume where you left off.
6. There will be a drop-down menu with three choices. Select “Troubleshoot” if there are issues.
7. Click the “Advanced” button.
8. Simply go into the “UEFI Firmware Settings” menu and hit the “Restart” button.
9. Click “BIOS Setup” and press “Enter.”

This technique of entering the BIOS takes longer than entering it during startup, but it is a failsafe alternative that is not time sensitive.

The Command Prompt for Windows 11’s BIOS

PowerShell and Terminal are only two examples of the many task automation and configuration management tools that may be used to access BIOS. To accomplish this, just do what I say below.

1. Initiate your chosen application.
2. Just hit the “Enter” key after typing “shutdown /r /o /f /t 00” or “shutdown.exe /r /o.”
3. There will be a plethora of choices presented to you. Go to the Troubleshoot menu.
4. To access the “Advanced Options” menu, you must select it.
5. Launch “UEFI Firmware Settings.”
6. Go ahead and click “Restart.”

The PC will restart and boot into BIOS without your intervention.

Tutorial: Creating a Desktop Icon to Quickly Launch Windows 11’s BIOS

If you need to get into BIOS frequently, you can set up a shortcut that will take you there instantly. The procedure is as follows:

1. When you right-click the desktop, choose “New,” and then “Shortcut,” you’ll create a shortcut.
2. The field labelled “Type the location of the item” the command “shutdown /r /o /f /t 00”
3. To proceed, click “Next” and then follow the on-screen instructions.

How to use the shortcut to enter BIOS after it has been created:

1. To use, simply double-click the link.
2. To begin troubleshooting, select it.
3. Choose the “Advanced” tab.
4. Pick “UEFI Firmware Settings” from the menu.
5. Simply hit the “Restart” button.

Upon booting, the computer will immediately go into the BIOS setup.

The Shift+Restart Method for Accessing the Windows 11 BIOS

Here’s how to go into the BIOS in Windows 11 without logging in:

1. Press and hold Shift, then click the Power button, and then select “Restart” from the lock or sign-in screen.
2. Next, you’ll see the Advanced Startup menu. Go to the menu and select “Troubleshoot.”
3. Click the “Advanced” button.
4. Pick “UEFI Firmware Settings” from the menu.
5. Make use of the “Restart” option.

If you are logged in, you will have the same access:

1. To access the Start menu while holding Shift, do the following:
2. Choose the “Power” button.
3. Simply click “Restart.”
4. From the Advanced Startup menu, choose “Troubleshoot.”
5. Pick the “Advanced” tab.
6. Follow the prompts to adjust the UEFI firmware.
7. Choose “Restart” from the menu.