When the Nintendo Switch works well and allows you to play games on the go, it’s as much fun as it is when it breaks down and refuses to turn on when you want to play. The truth is that the Nintendo Switch has a bug that forces it to switch off, giving the impression that it is permanently damaged.
We dug deep into this and uncovered a lot of typical factors for your Nintendo Switch system’s lifelessness. Some possible causes for your Nintendo Switch console not turning on include:
Charging Cord Issues – The charging cord is frequently the cause of the console’s inability to turn on. Look for any damage, and if you’re working with a cable that isn’t compatible, replace it (with a Nintendo official equivalent, preferably).
Empty Battery – It’s possible that your battery is depleted and you’re not aware of it. If you’re a new Switch user, you should be aware that when the battery is completely drained, the console’s screen takes a long time to light up when it’s put into charge mode.
Firmware Failure – This issue is frequently seen as a result of some type of software failure. If you find yourself in this predicament, the first thing you should do is force a restart. You’ll have to perform a hard reset if it doesn’t work.
Hardware Failure – If none of the suggestions in this article work, you’re left with little choice but to assume you’re dealing with a hardware issue. Your only alternative in this situation is to have your console repaired.
Let’s look at some of the solutions now that we’ve gone through every possible cause of this issue on your Nintendo Switch console. To see if your problem can be fixed, follow the steps in the order listed below.
Read Also:
Understanding the Problem
Before diving into the solutions, let’s understand the nature of the problem. When your Nintendo Switch won’t turn on, it means that the console is unresponsive and shows no signs of powering up. You might press the power button, but the screen remains black, and there’s no sound or indication of activity.
Possible Causes
Several factors can contribute to the Nintendo Switch not turning on. It’s essential to diagnose the issue correctly to apply the appropriate solution. Here are some common causes:
- Battery Depletion: The most common reason for the Switch not turning on is a completely drained battery. If you haven’t used your console for an extended period, the battery may have discharged entirely.
- Faulty Charger or Cable: A malfunctioning charger or USB-C cable can prevent the Switch from charging correctly or turning on. Check for physical damage or use a different charger to rule out this possibility.
- Software Glitch: Occasionally, a software glitch or freeze can cause the console to become unresponsive. This can happen during gameplay or when the console is in sleep mode.
- Overheating: If the Switch’s internal temperature rises too high, it may refuse to turn on as a safety measure to prevent damage. This can occur if the console is left in direct sunlight or in a hot environment.
- Hardware Issues: In rare cases, hardware problems, such as a damaged power button, faulty battery, or motherboard issues, can be the root cause of the problem.
How Do I Turn On My Nintendo Switch If It Won’t Turn On?
Here are the answers.
1. Examine The Charging Cord
The Nintendo Switch, like the majority of portable consoles, has had charging wire troubles in the past. No matter how careful you are, the charging wire will degrade with time (especially if you play while charging), so make sure it is not damaged.
Look for exposed cables, frayed wires, a bent adaptor, or bent pins in the vicinity. It’s also a good idea to use an official Nintendo Switch charging wire unless you don’t have a choice – a third-party connector may cause long-term damage to your device and reduce its battery life.
If your charging cord is damaged or you’re using a third-party charging cord, we recommend replacing it with an official Nintendo Switch cable cord to ensure proper charging and prevent long-term battery concerns. Continue to the following step if you’re convinced your charging port isn’t the issue.
2. Make Sure Your Nintendo Switch is Fully Charged
Before presuming it’s a hardware issue, double-check that your Nintendo Switch is completely charged. I know that sounds absurd, but it’s possible you didn’t connect the cord properly and the console didn’t charge at all. If the charging cord you’re using is older or not designed by Nintendo, it will take longer to charge the system.
Before proceeding to the other solutions for this problem, make sure your Nintendo Switch is fully charged, then check if the system cooperates; if it doesn’t, proceed to the next step below.
3. Restart The Computer
If an issue with the power charging cord has been ruled out, the next thing you should check into is a possible firmware flaw. We’ve validated that customers with the same issue were able to turn on their Nintendo Switch consoles by pressing the power button precisely.
Note: If the problem persists after you’ve completed this repair, you’ll almost certainly need to force restart each time it occurs. The steps for turning on your Nintendo Switch with simply the power button are as follows:
Step 1: Press and hold the power button on the console’s top for 12 to 15 seconds. When the seconds have passed, release the button and press it three times more quickly, the third time holding the button until the Nintendo Switch turns on.
Step 2: See if you can make it past the first screen. If you’ve tried everything else and your Nintendo Switch still won’t function, keep reading for the last solution.
4. Carry Out a Hard Reset
Finally, you can perform a hard reset, often known as a factory reset, on your console. This technique can be used in a variety of situations where your console refuses to start. Factory resetting the Nintendo Switch is also said to boost performance.
The following are the steps to perform a hard reset on your Nintendo Switch:
Step 1: Press and hold the power and up/down volume buttons at the same time for 5 seconds to enter Maintenance Mode.
Step 2: Scroll to Initialize Console Without Deleting Save Data in Maintenance Mode with the Joy-Con, then press OK. Check to discover if your Nintendo Switch is currently functioning by following the on-screen directions.
Read Also:
Conclusion
Before presuming it’s a hardware issue, double-check that your Nintendo Switch is completely charged. I know that sounds absurd, but it’s possible you didn’t connect the cord properly and the console didn’t charge at all.
Before proceeding to the other solutions for this problem, make sure your Nintendo Switch is fully charged, then check if the system cooperates; if it doesn’t, proceed to the next step below.
