If your computer is not working properly, rebooting it is a good alternative. A simple restart, on the other hand, will not solve a big problem. If you have a difficult infection or an issue with the operating system or hard disc, you should reset the computer.
Resetting Windows restores it to its factory defaults, just like it does with phones. All installed apps, as well as personal information and other data, are removed. The computer then reinstalls Windows, together with all of the original programmes and files. Essentially, your PC acts as if it were brand new.
In most cases, resetting is a simple task with no complications. However, a pop-up message stating that ‘there was a difficulty resetting your PC’ may appear. This could prevent you from resolving whatever computer problem you were having. It’s possible that your PC won’t boot up as a result of this.
This is a flaw that even Microsoft has acknowledged. They’ve also explained certain circumstances that could lead to this inaccuracy. Your computer came with Windows 10 pre-installed. This indicates that you did not upgrade from Windows 8.
The manufacturer has enabled compression to reduce the amount of disc space used by apps. You created a USB recovery drive using the feature of generating a recovery drive. Then you reset your computer using this recovery disc.
Any of these circumstances could result in a resetting error. It has the potential to obstruct your regular work. As a result, resolving this mistake is required, and it entails a few procedures. You’ll find several methods for fixing and booting up your computer in this post.
How To Resolve ‘There Was a Problem Resetting Your PC On Windows 10’
The strategies listed below may assist you in resolving this problem on your computer. These techniques would also work with Windows 8 and 8.1. Some minor processes, however, may be different.
Method 1: Repairing The Startup
Step 1: Plug in your USB recovery drive to your computer.
Step 2: Restart your computer.
Step 3: You’ll receive a message instructing you to boot by pressing a key. If you do this, the computer will boot up. Skip to Step 5 if you see this notice.
Step 4: If you don’t receive the above notice, you may need to adjust the boot sequence. The option can be found in BIOS.
Step 5: When you arrive at the Windows installation page, select Repair PC.
Step 6: Select Troubleshoot from the drop-down menu.
Step 7: Go to the Advanced tab and choose your options.
Step 8: Select Startup Repair from the drop-down menu. To fix the PC and the issue, follow the steps below.
Method 2: Recovering Data From A Hard Drive
This procedure may result in the deletion of your personal files. As a result, proceed with caution when utilising this.
Step 1: Plug in your USB recovery drive to your computer.
Step 2: Restart your computer.
Step 3: When the PC prompts you, press any key.
Step 4: On the Windows installation page, select the option to Repair your computer.
Step 5: Select Troubleshoot from the drop-down menu.
Step 6: Go to Advanced settings and select Recover from a drive from the drop-down menu.
Step 7: Follow the directions on the screen to proceed.
Method 3: Troubleshooting Windows Issues With bootrec.exe
Bootrec.exe is already installed on your computer. It’s a powerful tool for resolving Windows boot problems. However, it is not a foolproof procedure. To see if it works, you’ll have to put it to the test. The first steps are the same for both.
Step 1: Connect the PC to the recovery device in step one.
Step 2: Restart the computer and press any if prompted.
Step 3: Make a decision On the Installation window, you can repair your computer.
Step 4: Select Troubleshoot from the drop-down menu.
Step 5: Choose from a variety of advanced choices.
Step 6: Type “cmd” into the command prompt.
Step 7: Fill in the blanks with the following code. After each line, press enter.
/fixmbr bootrec
/fixboot bootrec
/scanos bootrec
/rebuild bootrec
The status of all commands will be displayed at the command prompt. After that, reboot the computer to see if the booting problems have been resolved.
Method 4: Reinstalling Using Command Prompt
This method will assist you if you are having trouble reinstalling Windows owing to a botched reset procedure.
Step 1: The first step would be to connect a USB recovery drive to the computer.
Step 2: Restart the computer.
Step 3: When you see a message like this, press any key on the keyboard.
Step 4: On the installation page, select the option to repair your PC/computer.
Step 5: Select Troubleshoot from the drop-down menu.
Step 6: Select Advanced Options from the drop-down menu.
Step 7: Select the Command Prompt option.
Step 8: In Notepad, type and hit Enter.
Step 9: Finally, in the notepad, select File and then Open.
Step 10: A drop-down menu will appear, from which you must select All files.
Step 11: Locate the letter of the USB disc you used to start your computer.
Step 12: Return to the command prompt and type x: and press Enter (instead of ‘x,’ type the letter of your USB drive).
Step 13: Press Enter after typing Setup.
Step 14: You will receive a Windows installation guide. To complete the reinstallation, follow the instructions on the screen.
Method 5: Using The Command Prompt To Run SFC and DISM
If your Windows files are corrupted, you can use this procedure to fix them. Let’s take a look at the procedures:
Step 1: Restart the computer after connecting the USB recovery disc.
Step 2: To restart your computer, press any key.
Step 3: On the new page that displays, select Repair Your Computer.
Step 4: Select Troubleshoot from the drop-down menu.
Step 5: Select Advanced settings from the drop-down menu.
Step 6: Choose Command from the drop-down menu.
Step 7: Type sfc /scannow /offbootdir=x: /offwindir=x:windows into the command prompt and hit Enter. Here, ‘x:’ refers to the Windows installation drive, while ‘x:windows’ refers to the path. Replace it with the letter of the drive on which Windows is installed.
Step 8: Your computer will run a scan and display the results.
Step 9: Run the scan a few more times for the best results.
Step 10: If any errors are found, they will be corrected automatically.
It’s also a good idea to run the DISM procedure after that. The installation disc is used to fix the computer. To do so, type the commands below into the command prompt.
Step 1: Type mkdir c:mount and then press Enter.
Step 2: Run the DISM.exe /mount-Image /ImageFile:x:sourcesinstall.wim /index:1 /mount command.
Enter the command dir:C:mount /readonly
Step 3: A notice will appear on the PC stating that the image is mounting. When the procedure is finished, you will be notified.
Step 4: Type dism.exe /Online /Cleanup-Image /Restorehealth /Source:c:mountwindows /LimitAccess into the command prompt and press Enter.
After that, any corrupted files should be repaired.
Method 6: Restore The System
A System Restore point is required for this procedure. The procedures below will assist you in determining if you have a System restore point.
Step 1: Insert the USB recovery device and restart the computer by pressing any key.
Step 2: On the Install page, select Repair Computer.
Step 3: Select Troubleshoot from the drop-down menu.
Step 4: Choose from a variety of advanced settings.
Step 5: Locate and select System Restore.
Step 6: Your PC’s System Restore Points will be shown. Choose the most recent option and follow the on-screen instructions.
Method 7: Clean Install
If the issue persists, the only option is to perform a fresh installation. Follow the steps outlined below:
Step 1: Restart your computer after connecting the installation media device.
Step 2: Click Format Drive after rebooting from the inserted device.
Step 3: Follow the on-screen directions to reinstall the operating system.
Conclusion
As previously said, a resetting issue can be extremely inconvenient because it prevents you from booting up your computer. I hope you found this tutorial helpful in repairing your computer in a simple manner. If you’re still having trouble with this problem, you should get help from a local specialist.
