How To Fix ‘Can’t Connect To This Network’ Error Guide

In our increasingly connected world, the ability to access the internet seamlessly has become essential. However, you may encounter occasional hiccups in your network connectivity, with one common issue being the dreaded “Can’t Connect to This Network” error.

In this comprehensive guide, we will unravel the meaning of this error, explore its potential causes, and provide practical solutions to help you regain your internet connection.

Can't Connect To This Network

Understanding the “Can’t Connect to This Network” Error

The “Can’t Connect to This Network” error is a message you may encounter when attempting to connect to a wireless network, typically on a Windows-based computer or device.

It signifies that your device is unable to establish a connection with the selected network, preventing you from accessing the internet.

Read Also:

  1. Discord Text Formatting
  2. Discord Overlay Not Working
  3. Configuration system failed to Initialize

Common Causes of the “Can’t Connect to This Network” Error

Several factors can contribute to this connectivity issue. It’s essential to understand these causes to troubleshoot effectively:

  1. Incorrect Wi-Fi Password: Entering an incorrect Wi-Fi password is one of the most common reasons for this error. Ensure you have the correct password.
  2. Signal Interference: Physical obstacles, electronic devices, or other networks in close proximity can interfere with your Wi-Fi signal, making it difficult to connect.
  3. Outdated or Incompatible Drivers: Outdated or incompatible network drivers can lead to connectivity problems. Keeping drivers up-to-date is crucial.
  4. Router Issues: Problems with your router, such as firmware glitches or overheating, can disrupt network connectivity.
  5. Network Profile Corruption: Sometimes, the network profile on your device can become corrupted, leading to connection errors.
  6. IP Configuration Problems: Issues with your device’s IP address configuration can prevent it from connecting to the network.

How To Fix The Windows 10 Error Can’t Connect To This Network

This article serves as a tutorial for Windows users; the numerous techniques described below may be one of the reasons why you are experiencing this problem. It’s possible that you’ve made changes to your computer that are preventing you from connecting to the network.

Replace the router, change the security key of your wireless network, or anything else could be the cause. Depending on the sort of changes made to your computer, you can use any of the procedures described below.

Check if any of the following changes have been done to your computer by reading the article attentively. If you have no prior experience with computers, simply follow the instructions from step 1 to the last step, or until your problem is resolved.

1. Tweak Wireless Network Adapter Drivers 

One of the causes of this problem could be that your network adapter drivers are out of date. This approach demonstrates how to upgrade network adapter drivers in multiple steps. Follow the steps below to get started:

Step 1: Open the Device Manager by going to the Windows tab and looking for it.

Step 2: Next, pick Network Adapters from the drop-down menus that appear on the screen.

Step 3: Right-click on your network device and choose Update driver software from the menu.

Step 4: Choose “Automatically search for updated driver software.” When the driver has been successfully installed, click the “Close” button.

Step 5: After installing the driver, restart your computer to see if the problem has been repaired.

Step 6: If the problems remain, right-click the network adapter and pick uninstall from the context menu.

Step 7: Restart your computer, and Windows will reinstall it for you.

Step 8: If the problem persists, repeat steps 1 through 8 until you reach “Update driver software,” then select “Let me pick from a list of devices.”

Step 9: Select “Browse my computer for software” and then “Let me pick from the list of devices” from the drop-down menu.

Step 10: Find and uncheck the “Show compatible hardware” option.

Step 11: Choose the correct driver from the list and verify that the problem has been resolved.

Step 12: If the problem persists, go to your drivers and repeat the steps until you reach “Network Adapters” and click Properties.

Step 13: Next, select the “Rollback Driver” option from the “Driver” page.

Step 14: Follow the prompts to roll back the driver, then double-check to see if the problem has been resolved.

If the problem persists, try one of the other methods on the list.

 2. Turn Off and On Your Router or Modem

You can also try turning off and on your router for a while to see if that solves the problem. Try connecting again by following the instructions below:

Step 1: Press the power button on your router to turn it off and wait for around 20 minutes.

Step 2: Switch the router on.

Step 3: In the Wi-Fi connection search list, look for your network.

Step 4: Once you’ve located your network, reconnect to it. This will create a new connection with your internet service provider.

 3. Use The Troubleshooter on Windows

You can utilise the network troubleshooter option in this approach as follows:

Step 1: In the search bar in the left bottom corner of your PC, type “Network Troubleshooter” and hit enter.

Step 2: Select “Troubleshooting” from the drop-down menu that appears on the screen, and then click on the Hardware and Sound option.

Step 3: Next, select Hardware and Devices. To see if you have Windows 10 compatible drivers, go to “Configure a device.”

Step 4: If not, you must obtain network drivers from the manufacturer’s website. Save it to your computer’s desktop. Open the RUN dialogue by typing RUN in the search box in the bottom left corner of your screen.

Step 5: In the Run dialogue, type “devmgmt.msc.” Locate your network adapter in the Network Adapters section and right-click it.

Step 6: Next, go to the Properties menu and pick the Driver tab.

Step 7: Select “Follow the on-screen instructions to complete the uninstallation” and then “Follow the on-screen instructions to finish the uninstallation.” Go to the driver you downloaded, select it, and then go to Compatibility.

Step 8: Under the checkbox “Run this programme in compatibility mode for,” select “Windows 7.”

Step 9: Select “Run as administrator” from the context menu when you right-click on the downloaded driver file. When prompted, select “OK.” Finally, restart your computer after the installation is complete.

If the problem remains, you can attempt a different approach.

 4. Change Your Wireless Adapter’s Network Key (Security/Encryption) From WPA-PSK/WPA2-PSK to WPA2-PSK With TKIP/AES

One of the reasons for your network connection problem could be because you’re utilising WPA-PSK (or WEP). To confirm this problem, follow these steps:

Step 1: To begin, use the Windows + A key to bring up the action centre.

Step 2: Go to Settings and select Network and Internet from the drop-down menu.

Step 3: Next, select the advanced option.

Step 4: Select Properties from the drop-down menu. You’ll be able to see the security type your network employs.

Step 5: If your network uses WEP, inform your network provider to modify it to WPA-personal and utilise the TKIP technique for encryption so you may connect to it.

Step 6: You can do this on your own as well. You’ve done so by using a LAN cable to connect the PC.

Step 7: On your router, go to the Wireless Security page and convert WEP to WPA-PSK with TKIP/AES encryption.

Step 8: Click the Start button, input cmd, and then type ipconfig/all in the command prompt.

Step 9: Finally, look over the information in the list until you find the default gateway IP.

5. Ignoring The Network

This problem can be caused by a computer configuration that is incorrect. So, in order to fix the problem, we’ll go over the steps to forget the network and then reconnect to it again.

Step 1: Right-click on the Wi-Fi symbol in the bottom right corner of your desktop and select “Open Network and Internet Settings.”

Step 2: Then, on the left side, pick the Wi-Fi button, then “Manage Known Networks” and select the Wi-Fi network.

Step 3: Finally, click the Forget option, and then try to connect to the internet again.

 6. Reset The Network

When there are any flaws in Windows 10’s network settings, the issue can arise. As a result, by following the procedures outlined below, you can reset your network configurations.

Step 1: To begin, use the search bar in the bottom left corner of the desktop to find settings.

Step 2: Next, go to “Network and Internet” and choose “Network Reset.”

Step 3: Press the Reset Now button and wait for the process to complete.

Read Also:

  1. 0x80070002
  3. Windows Can’t Communicate with the Device or Resource


Some techniques have been provided in this post so that you can resolve the issue of “Can’t connect to this network in Windows 10” on your own.

Finding out about the network you’re using isn’t difficult, but the trouble is that there are a lot of different ways to remedy the problem, and you have to choose the appropriate one because you’re unfamiliar with this new technology. This article is meant to assist such users in resolving their problems.