You get the warning “No Internet, Secured” when you try to connect to the internet via Wi-Fi. If you don’t know how to fix the No Internet Secured Windows 10 issue, this guide is for you.
The issue differs from typical internet problems in that you are connected to the internet via a Wi-Fi network, but the router is unable to connect to the Internet, preventing you from accessing any online pages.
When you check your Internet connection, you’ll probably notice a small yellow triangle that you can click to bring up the No Internet, secured error message. A misconfigured IP address appears to be the source of the problem.
I’ve supplied a list of possible solutions because the error could be caused by a variety of circumstances. Simply follow the steps one by one.
Before doing anything else, determine whether the issue affects only one device or all devices. The first thing you should do is check to see if the problem is limited to a single device or if it is affecting multiple devices.
It could be a problem with your Windows 10 laptop, or it could be a problem with your access point or network. If only one device receives the error “No internet, secured,” keep reading. If you don’t want to read the rest of the article, skip to this part.
Read Also:
Understanding the “No Internet Secured” Wi-Fi Problem
What Does “No Internet Secured” Mean?
The “No Internet Secured” error message indicates that your Windows 10 device has successfully connected to a Wi-Fi network but cannot establish an internet connection through that network.
While the Wi-Fi connection itself is secure, there is an issue preventing access to the internet, which can be frustrating for users trying to browse the web, check emails, or use online services.
Causes of the “No Internet Secured” Wi-Fi Problem
To effectively address the “No Internet Secured” Wi-Fi problem, it’s essential to understand its potential causes. Common factors contributing to this error include:
- Incorrect Network Configuration: Misconfigured network settings, including IP address assignment or DNS settings, can prevent your device from accessing the internet even when connected to Wi-Fi.
- Router or Modem Issues: Problems with the router or modem, such as outdated firmware, overheating, or hardware failures, can disrupt the internet connection.
- Software or Driver Conflicts: Incompatible or outdated network drivers or conflicting software can interfere with internet access.
- IPv6 Connectivity: Issues with IPv6 connectivity can lead to the “No Internet Secured” problem, especially if your network primarily uses IPv6.
- Firewall or Security Software: Overly restrictive firewall settings or third-party security software may block internet traffic, causing connectivity problems.
How To Solve the ‘No Internet Secured’ Issue
Because there is no one-size-fits-all solution for the Wi-Fi No Internet Secured issue, you should try each of the methods given below one at a time to discover which one works best for you.
Before attempting any of the options described below, make sure your Wireless adapter is operational. To do this test, try a power recycle (switch off and then turn it on again). If everything is in order and no problems are detected, begin implementing the suggested fixes.
Method 1: Update The Wi-Fi Adapter Drivers
Your computer may be unable to connect to the Internet once more due to an outdated driver. Let’s double-check that the WiFi adapter driver is current.
Step 1: Using the Windows + x keyboard shortcut, go to Device Manager and expand Network Adapters.
Step 2. Select the network adapter that your computer is now using from the Network adapters section, right-click it, and select Update Driver Software.
Step 3: Click on Search automatically for updated driver software and wait for Windows to finish the search.
Method 2: Disable Wi-Fi Sharing / Wi-Fi Hotspot Software
Wi-Fi Sharing or hotspot programmes can cause configuration errors in your network adapter. If you have this type of software installed, consider updating it first or deleting it if that isn’t possible.
Any non-Microsoft stuff on the network adapter must be disabled if the notice “No internet secured” continues after the update or removal:
Step 1: Press and hold the Windows and X keys at the same time.
Step 2: Access the Internet
Step 3: Change the adapter’s settings by clicking Alter the adapter’s settings.
Step 4: Select your wifi network with a double-click.
Step 5: Selecting Properties
Step 6: Turn off any non-Microsoft components.
Step 7: Reboot your computer.
Method 3: Change Your Network’s IP Settings
We need to make sure your network adapter is set up properly for a typical home or office network before we modify or update anything.
Step 1: Right-click the Start menu and select Network Connections.
Step 2: Alter Adapter Preferences
Step 3: To open the Network Adapter, double-click the Wi-Fi Adapter.
Step 4: Selecting Properties
Step 5: Verify that the following boxes are checked:
File and Printer Sharing for Microsoft Networks QoS Packet Scheduler Internet Protocol Version 4 (TCP/IPv4) Client for Microsoft Networks
Step 6. In the Microsoft LLDP Protocol Driver Link-Layer Topology Discovery Responder Link-Layer Topology Discovery Mapper I/O Driver, uncheck Internet Protocol Version 6 (TCP/IPv6). (Perhaps this is what’s causing the problem.)
Step 7: Select Internet Protocol Version 4 from the drop-down menu.
Step 8: Make sure the IP address and DNS server are both set to obtain automatically.
Close the properties window and double-check that the no internet access error has gone away.
Method 4: Reset The Network
In Windows 10, the network reset utility returns the network configuration to its default settings. And, if the issue is caused by an incorrect configuration, this will almost certainly be very helpful.
Step 1: Search for Network Reset and click on the first item that comes up.
Step 2: A new box will appear, notifying you of the consequences of resetting your network.
Step 3: Select “Reset now” to reset the network and your PC.
Method 5: Configure A Dedicated DNS Server
Typically, the problem stems from the DNS server. Domain names are converted into IP addresses by the DNS server. You can’t connect to the internet unless your DNS server is up and running.
Step 1: Select Internet Protocol Version 4 (TCP/IPv4) from the drop-down menu.
Step 2: Verify that the DNS server addresses given below are used.
Step 3: Type in the IP address that appears below.
Step 4: The chosen DNS server is 1.1.1.1.
Step 5: An alternative DNS server is 1.0.0.1.
Step 6. Click Ok to verify that the No Internet Secured problem has been addressed.
Read Also:
Conclusion
Well, there isn’t any internet security. Most Windows 10 users are experiencing and reporting issues with the operating system on a regular basis. So I did my best to develop a comprehensive list of internet problem solutions.
It is hoped that now that you have used the techniques above, your computer is connected to the internet and your wifi is working. All of the solutions are effective, and as a consequence, they may completely solve the problem of no internet security over wifi.
